×
Quick Equipment Search
Equipment Filter










used search tag used search tag

John Deere 995

Reversible Plow


  • Moldboard frame pivots with the bottoms
  • Plastic moldboard and steel shins
  • Landsides with wedges
  • Front gauge wheels



View Product Brochure

Features

V-style mainframe distributes weight for good penetration
995 mainframe 995 mainframe

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

 

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Moldboard frame pivots with the bottoms
Moldboard frame Moldboard frame

All 995 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Integral on-land hitch provides excellent maneuverability
Integral on-land hitch Integral on-land hitch
#

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

  • Category 3/3N Quik-Coupler compatible
  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth to 356 mm (14 in.)
  • Provides ample clearance between the tractor tires and the plow
Adjust front gauge wheels to limit plowing depth
Front gauge wheels Front gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels 995 Moldboard Plow rear gauge wheels
#

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

  • Equipped with 6.70-15 tires for good flotation
  • Easy turnbuckle adjustment on rear gauge wheel
  • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

Specs & Compare

ADD MODEL

Key Specs

995
Current Model
Total width of cut
Option 12.3 m
7.5 ft
Option 22.7 m
9 ft
Option 33.2 m
10.5 ft
Option 43.7 m
12 ft
Plowing depth35.6 cm
14 in.
Horsepower required - Option 15-bottom: 96.9-123 kW
130-165 hp
Option 26-bottom: 111.9-130.5 kW
150-175 hp
Option 37-bottom: 130.5-149.1 kW
175-200 hp
Option 48-bottom: 149.1-186.4 kW
200-250 hp

Hitch

TypeCategory 3N or 3
SteeringIntegral, in-furrow
No
Integral, on-land
Yes
Semi-integral, on-land
No
Drawn, in-furrow
No
Drawn, on-land
No
Quick-coupler compatible
Yes
ReversibleType of reversing
Hydraulic cylinder
Yes

No. of bottoms

Option 15
Option 26
Option 37
Option 48
Option 5
Option 6
Option 7
Option 8

Total width of cut

Adjustment
Option 12.3 m
7.5 ft
Option 22.7 m
9 ft
Option 33.2 m
10.5 ft
Option 43.7 m
12 ft
Option 5
Option 6
Option 7
Option 8

Weight (approximate)

Option 11,678 kg
3,700 lb
Option 21,860 kg
4,100 lb
Option 32,041 kg
4,500 lb
Option 42,440 kg
5,368 lb
Option 5
Option 6
Option 7
Option 8

Clearances

Vertical81.3 cm
32 in.
Fore-aft

Standards

ShearboltStandard
Safety tripOptional
Spring resetNo
HydraulicNo

Coulters

Option 1
Option 2
Option 3

Bottoms

Option 1Plowing depth
35.6 cm
14 in.
Steel moldboard
Option 2Plastic moldboard
Option 3
Option 4
Option 5
Option 6

Frame

Option 1Thickness: 17.8x10.2x0.8 cm
7x4x0.313 in.
Option 2
Option 3
Expandable

Horsepower required

Option 15-bottom: 96.9-123 kW
130-165 hp
Option 26-bottom: 111.9-130.5 kW
150-175 hp
Option 37-bottom: 130.5-149.1 kW
175-200 hp
Option 48-bottom: 149.1-186.4 kW
200-250 hp

Landing

Gauge wheel

Tires

Trashboards

Additional features

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Landsides

Landsides - BP16597
Double landsides Double landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides - BP16603
Double landsides Double landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides and Wedges - BP16598
Landsides with wedges Landsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Landsides and Wedges - BP16604
Landsides with wedges Landsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Videos