×
Quick Equipment Search
Equipment Filter










used search tag used search tag

John Deere 2025R

Compact Tractor


  • Standard LED headlights and fender lights
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes



Starting At:

$20,923.00

View Product Brochure

Features

Durable, efficient, high-torque 3-cylinder diesel engine provides adequate power
3-cylinder Yanmar TNV Series diesel engine 3-cylinder Yanmar TNV Series diesel engine

Power is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine.

 

This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.

 Model

Number of
cylinders

Engine
displacement

Gross engine power

Power take-off (PTO) power

2025R

3

1.267 L

18 kW (24.2 hp)

12.8 kW (17.2 hp)

Yanmar TNV Series engine offers these features:
  • Economical for good cooling and long life
  • Isolated engine provides reduced vibration and noise for the operator; indirect fuel injection uses a precombustion chamber to give the engine a smooth and quiet operation; aluminum-alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and less noise from the piston slap
    • Higher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiency
  • Timing-gear teeth have a designed roll-off profile giving almost no clash, no noise, and no backlash
  • High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels
  • Fuel filter with replaceable element
  • Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
  • Glow plugs provide quick starts in temperatures down to -18°C (0°F) (Optional engine coolant heater attachment will assist starting under more extreme conditions.)
  • Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel; this system will self-prime the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shut off eliminates fuel shut-off knob
  • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Dry-type air cleaner with safety element keeps dirt and other contaminants out of the engine
    • Safety element (second filter) will protect engine if primary filter would develop a leak
    • Protects engine when servicing primary filter
  • Air filter restriction indicator is standard equipment on the 2025R Tractor
  • Sealed-radiator compartment keeps trash and debris on outside of hood
  • Horizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfort

Yanmar is a trademark of Yanmar Company Limited.

Easy-to-use hydrostatic transmission (HST) increases efficiency

The 2R Series are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation
  • Transmission oil cooler cools transmission oil for longer transmission life

Safety features of the HST include:

  • The tractor will only start with the range lever in neutral
    • If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
  • The engine will shut off if the operator leaves the seat and the forward/reverse pedals are depressed
Twin Touch foot controls Twin Touch foot controls
Two-range transmission
Two-speed transmission Two-speed transmission

Transmission has two speeds - hi and lo range.

  • The range lever is located next to the seat, conveniently within reach of the operator
  • All tasks can be performed using two ranges on the 2025R which means less shifting throughout the day

Durability features include:

  1. Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise
  2. Innovative transaxle combines an HST, gear reduction axle, and clutch
  3. Pressure side filtration allows the use of a fine-mesh filter
  4. One pump to supply charge pressure and implement A flow divider splits the flow to various circuits throughout the tractor.
  5. The transaxle has an oil cooler which provides improved hydraulic cooling performance
Fast and easy implement changeover offers versatility
Easy to change implements Easy to change implements
  • Front Quik-Tatch™ hitch makes changing front implements quick and easy
  • All front implements (blades, brooms, and snow blowers) use a common hitch
  • AutoConnect™ Mid-Mount Mower Deck, 120R Loader, and 260B Backhoe can be taken on or off within 5 minutes, and no tools are required
  • Changing rear implements is a snap with the iMatch™ Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch compatible
Implement compounding improves efficiency
Implement compounding (2025R Tractor shown) Implement compounding (2025R Tractor shown)
  • Loader, mid-mower, and a variety of rear hitch implements can be attached to the tractor at the same time
  • Optional premium independent mid lift system operates independent of the rear 3-point hitch. This gives the operator the flexibility to leave the mid mower attached when completing other tasks.

Superb serviceability improves productivity

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Two quarter-turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Fasteners on the engine side panels Fasteners on the engine side panels
  • The under-hood gas-lift support provides easy access to the engine compartment and eliminates the need for a mechanical prop rod.
Under-hood gas lift makes it easy to access the engine Under-hood gas lift makes it easy to access the engine
  • External hood latch requires no tools and can release using the tractor key.

  • Easy access to regular service points minimizes service time.

  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels.

  • Tractors are equipped with a mechanical air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed.

Air filter restriction indicator Air filter restriction indicator
  • All external engine, fuel, and transmission filters are easily accessible.
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling.
Fuel tank at rear of tractor Fuel tank at rear of tractor

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

Optional cab offers protection from elements

The Mauser cab offers protection from the elements and expands the versatility of 2025R Tractors to perform in all climates.

2025R cab 2025R cab

Key features:

  • Full glass doors for maximum visibility
    • Curved glass for a styled look
    • Sealed for cold weather operation
    • Easily removable for summer operation
  • Heater with fan
    • Switches and vents integrated into headliner
  • Dome light
  • Fully openable front and rear windows with gas struts
  • Front sun visor
Operator view from inside the cab Operator view from inside the cab
  • Front work lights
Front work lights Front work lights
  • Front wiper with washer system
  • Dual outside mirrors
  • Rollover protective structure (ROPS) certified cab frame
    • Allows for improved rear visibility
    • Reduces overall height
  • Rubber isolation at all mounting points
  • Interior sound insulation
Interior sound insulation Interior sound insulation
  • Immersion-primed and powder-coated cab frame
    • Provides superior corrosion resistance
  • Integrated John Deere styling
John Deere styling on 2025R cab John Deere styling on 2025R cab

Specifications:

  • Cab height: 1495 mm (58.9 in.)
  • Overall height when installed: 2040 mm (80.3 in.)
  • Overall height when installed to top of beacon: 2210 mm (87 in.)
  • Overall width with cab installed: same as tractor width
  • Cab weight: 236 kg (520 lb)

Optional kits:

  • Rotating beacon light – BXX10310
  • Rear LED work light kit – BLV11083
  • Mauser cab relocation bracket – BXX10507 (used with 1025R and 2025R Tractors with Mauser cab and mechanical-self-leveling [MSL] loaders)
    • Prevents interference with Mauser cab and MSL loader mast

Compatibility and installation:

  • Compatible with:
    • Model year 2017 and newer 2025R Tractors
  • Not compatible with:
    • 260B Backhoe

Specs & Compare

ADD MODEL

Key Specs

2025R
Current Model
Engine power (gross)SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off (PTO) power12.8 kW
17.2 hp
Steering hydraulics13.4 L/min
3.5 gpm
Implement hydraulics13.4 L/min
3.5 gpm
Hitch typeLimited Category 1
Lift capacity, 24-in. behind link arms415 kg
915 lb
Standard transmission; forward/reverseHydrostatic - two range
Cruise controlStandard
Approximate shipping weight (open-station; cab)Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb
Wheelbase1600 mm
63 in.

Engine

Family
ManufacturerYanmar®
Engine model3TNV80F-NCJT
Engine power (gross)SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off (PTO) power12.8 kW
17.2 hp
Rated engine speed3200 rpm
TypeDiesel
Injection pump typeIndirect injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacementThree cylinders: 1.267 L
77 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke80 x 84 mm
3.2 x 3.3 in.
Compression ratio23.1:01
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed53.1 Nm
39.1 lb-ft
Fuel tank capacity20.4 L
5.39 gal.

Electrical

Battery size500 CCA
Alternator (12-V)40 amp
Starter size1.2 kW
1.6 hp

Fuel system

TypeIndirect injection
Fuel consumption

Transmission

Standard transmission; forward/reverseHydrostatic - two range
Optional transmission; forward/reverse
Left-hand reverserNo
Transmission gear ranges
Final driveSpur gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
612 kg
1349 lb
Rear
1100 kg
2425 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load

Hydraulics

TypeOpen center
Pump rated outputSteering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7 gpm
Pump typeGear
Maximum operating pressure137 bar
1987 psi
Draft control sensingPosition control
Remote control valves availableTwo

3-point hitch

TypeLimited Category 1
Lift capacity, 24-in. behind link arms415 kg
915 lb

Power take-off (PTO)

StandardRear - 540 rpm
Mid - 2100 rpm
Optional
ControlIndependent
ClutchWet disk
Brake (for mid and rear PTO)Wet disk
Engagement method

Fluid capacities

Crankcase with filter2.7 L
2.9 qt
Transmission and hydraulic system

Final drive

TypeSpur gear
Differential lockYes

Operator station

Rollover protective structureType
Foldable
OSHA, SAE, ASAE
Platform - flat/straddleThree-piece semi flat
Gear shift location - console/floorLeft-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Height
Wheelbase1600 mm
63 in.
Front axle clearance
Turning radius with brakes
Turning radius without brakesOutside front tire: 2.51 m
8.2 ft
Limited slip differentialNo
Approximate shipping weight (open-station; cab)Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb

Tires

FrontR3 Turf: 23x8.50-12
R3 Radial: 220/55-R12
R4 Industrial: 23x8.50-12
RearR3 Turf: 12-16.5
R3 Radial: 280/70 R16
R4 Industrial: 12-16.5
Front tread range
Rear tread spacing

Miscellaneous

ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Accessories

Chain Box - 151NLV5WS812470
Chainsaw Holder - 151NLV5WS812460
Clamp Kit - 151NLV5WS812485
Handheld Leaf Blower Holder - 151NLV5WS812466
Long Tool Holder (2) - 151NLV5WS812450
Long Tool Holder (4) - 151NLV5WS812455
Mini Clamp Kit - 151NLV5WS812480
ROPS Rack - 151NLV5WS812425
String Trimmer Holder - 151NLV5WS812475
Super Clamp Kit - 151NLV5WS812490
Universal Mount Kit - 151NLV5WS812435

Backhoes

16 In. Bucket (0.90 Cu. Ft.) - 151NLVBLV10026
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

8 In. Bucket (0.42 Cu. Ft.) - 151NLVBLV10024
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Grab Handle and Mounting Parts - 151NLVBXX10278
Hydraulic Thumb - 151NLVBXX10248
Mechanical Thumb - 151NLVBLV10750
Ripper - 151NLVBXX10247
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Rubber Street Pad Kit - 151NLVBLV10986
Trenching Bucket - 151NLVBXX10246
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Front Hitch

A-frame quick-attach system Category 1N - 151NLVBLV10637
Front Attaching Support Kit (Quick Hitch) - 151NLVBLV10796
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
Front Quick Hitch to Tractor Interface Kit - 151NLVBLV10680
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
Hydraulic Angling - 151NLVBLV10880
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
Quick Hitch Kit - 151NLVBLV10708
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
SPHC Front Hitch Compatibility Kit - 151NLVBXX10874
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements

Hydraulics

3rd Function Hydraulic Hose Kit - 151NLVBXX10210
Frontier™ grapple shown on 120R and 2025R Frontier™ grapple shown on 120R and 2025R
Frontier four-in-one bucket on 120R and 2025R Frontier four-in-one bucket on 120R and 2025R
120R loader connection location on 1E and 1R tractor 120R loader connection location on 1E and 1R tractor
120R loader connection on 2025R tractor 120R loader connection on 2025R tractor
Joystick for usage with third-function Joystick for usage with third-function
120R loader third-function lines on boom 120R loader third-function lines on boom
120R loader third-function connection for implements at torque tube area 120R loader third-function connection for implements at torque tube area
Overview

Add versatility to the tractor and loader package with the addition of a third-function kit. They enable the use of attachments such as four-in-one buckets, root grapples, and hydraulic angling blades further enhancing the tractors’ ability to help get jobs done.

 

Tractor series

Loader model

Loader bundle for non-self-leveling loaders

Loader bundle for mechanical self- leveling loaders

Tractor bundle

MY20 and newer

1E and 1R

120R

BXX10268

BXX10370

BXX10835

MY20 and newer

2025R

120R

BXX10210

BXX10375

BXX10846

 

3rd Function Hydraulic Lines - 151NLVBXX10375
Frontier™ grapple shown on 120R and 2025R Frontier™ grapple shown on 120R and 2025R
Frontier four-in-one bucket on 120R and 2025R Frontier four-in-one bucket on 120R and 2025R
120R loader connection location on 1E and 1R tractor 120R loader connection location on 1E and 1R tractor
120R loader connection on 2025R tractor 120R loader connection on 2025R tractor
Joystick for usage with third-function Joystick for usage with third-function
120R loader third-function lines on boom 120R loader third-function lines on boom
120R loader third-function connection for implements at torque tube area 120R loader third-function connection for implements at torque tube area
Overview

Add versatility to the tractor and loader package with the addition of a third-function kit. They enable the use of attachments such as four-in-one buckets, root grapples, and hydraulic angling blades further enhancing the tractors’ ability to help get jobs done.

 

Tractor series

Loader model

Loader bundle for non-self-leveling loaders

Loader bundle for mechanical self- leveling loaders

Tractor bundle

MY20 and newer

1E and 1R

120R

BXX10268

BXX10370

BXX10835

MY20 and newer

2025R

120R

BXX10210

BXX10375

BXX10846

 

Power Beyond Kit - 151NLVBXX10915
Power beyond kit example shown Power beyond kit example shown
LVB25956 Power beyond kit shown LVB25956 Power beyond kit shown
BLV11216 Power beyond kit shown BLV11216 Power beyond kit shown
BXX10915 Power beyond kit shown BXX10915 Power beyond kit shown
BXX10837 Power Beyond Kit shown BXX10837 Power Beyond Kit shown
BLV10381 Power Beyond Kit shown BLV10381 Power Beyond Kit shown
Overview

Power beyond kits provide access of pressurized hydraulic oil at the rear of the tractor for operating attachments equipped with an open center control valve, such as a backhoe and log splitter when continuous hydraulic flow is required.

 

NOTE: When nothing is hooked up to the power beyond, it is critical the loop is closed to ensure proper hydraulic flow.

 

NOTE: Power beyond kits are not included in the backhoe frame attachments and must be ordered separately.

Rear Tubing Kit - 151NLVBXX10847

Lighting

Dual Light Forward Lighting Kit - 151NLVLVB25546
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
LED Work Light Kit - 151NLVBLV10497
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
Open Station Work Light Brush Guard Kit - 151NLVBLV10399
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
Premium LED Work Light Kit - 151NLVBLV10673
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
ROPS Lights Brush Guard Kit - 151NLVBLV10400
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
Rear Work Light Kit - 151NLVBLV11083
BLV10674 radio installation kit shown in 2025R cab BLV10674 radio installation kit shown in 2025R cab
Overview

Dealer-installed attachments are available for the factory-installed cab on the 2025R Tractor to improve functionality and communicate to others in the surrounding area.

Single Rear Auxiliary Rear Work Light Kit - 151NLVLVB25547
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights

Open Operator's Station

Canopy Kit - Rigid Plastic - 151NLVLP64809
LP64809 canopy shown LP64809 canopy shown
Overview

Steel frame construction, ABS plastic roof. Approved for use on small chassis compact utility tractors with both fixed and folding roll over protective structures (ROPS). The canopy protects the operator from direct sun exposure and weather. Heavy-duty construction that is built to last.

License Plate Kit - 151NLVBXX10277
BXX10277 License plate kit shown BXX10277 License plate kit shown
Overview

License plate kits allow an operator to display a license plate on the tractor in order to meet local laws and regulations in which to drive on public roads.

ShadePro Designed Canopy - 151NLVBXX10589
Shadepro Fan Kit - 151NLVBXX10591
Tractor Cover - 151NLVLP95637
LP95637 Tractor cover shown LP95637 Tractor cover shown
Overview

Provide all-weather protection to the tractor when not in use with a tractor cover.

Benefits
  • Weather resistant material
  • Protects against UV damage, rain, dirt, etc.
  • Keeps the seat dry

Operator's Station

133.4-mm (5.2-in.) tie-rod assembly - 151NLVRE561251
38-mm (1.5–in.) ball with model year 2010 stud - 151NLVRE576490
38.1-mm (1.5–in.) ball mount and socket arm - 151NLVRE574454
76.2-mm (3-in.) tie-rod assembly - 151NLVRE558819
Apple™ Cable, 6 Ft - 151NLVPM191-050594
Bracket, Arm, RAM Double Socket - 151NLVPF80459
Cell Phone Suction Cup Kit - 151NLVBXE10606
Dual USB Charger - 151NLVPM191-052901
Micro USB Cable, 6 Ft - 151NLVPM191-050563
Mount - RAM U-Bolt - 151NLVPF80460
Mounting Ball Stud - 151NLVRE558821
Mounting Parts - Display Mount RAM - 151NLVAL212683
RAM Mount Vesa Bracket 1.5 - 151NLVUC17356
Type C USB Cable, 6 Ft - 151NLVPM191-050860
X-Grip Tablet Dual Suction Cup Kit for Tablets - 151NLVBXE10607

Radio

Heavy-Duty AM/FM, Weatherband, Auxiliary Input, SiriusXM Satellite, Bluetooth Radio - 151NLVSWJHD1635BT
Radio - 151NLVSWJHD1130WP
Radio Installation Kit - 151NLVBLV10674
BLV10674 radio installation kit shown in 2025R cab BLV10674 radio installation kit shown in 2025R cab
Overview

Dealer-installed attachments are available for the factory-installed cab on the 2025R Tractor to improve functionality and communicate to others in the surrounding area.

Sirius/XM Tuner - 151NLVSWSXV200B
Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod Ready - 151NLVSWJHD1630

Rear Power Take-Off (PTO)

John Deere Quik Knect™ PTO receiver - 151NLVBLV10953
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11178
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11177
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11201
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11203
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11202
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11200
John Deere Quik-Knect Driveline Yoke Bundle - 151NLVBLV11199

Rear Wheel Weights

50-lb (23-kg) Wheel Weight (1), cast iron, 12-in. rear wheel - 151NLVBM17972
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown) UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown) BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown) BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown) BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown) T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown) BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview

Wheel weights provide extra traction and stability by adding ballast to the rear wheels.

 

Click here to view the Wheel Weight Compatibility Guide

50-lb (23-kg) Wheel Weight (1), plastic, rear 12-in. wheel, with mounting hardware - 151NLVBM17976
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown) UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown) BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown) BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown) BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown) T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown) BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview

Wheel weights provide extra traction and stability by adding ballast to the rear wheels.

 

Click here to view the Wheel Weight Compatibility Guide

70-lb (32-kg) Starter Wheel Weight (1), cast iron, rear 12-in. wheel - 151NLVUC13499
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown) UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown) BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown) BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown) BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown) T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown) BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview

Wheel weights provide extra traction and stability by adding ballast to the rear wheels.

 

Click here to view the Wheel Weight Compatibility Guide

Mounting hardware (1) for attaching 70-lb (32-kg) Starter Weight and (2) 50-lb (23-kg) Cast-Iron Weights on 26-in. Tire - 151NLVBM18101
Mounting hardware (1) for attaching 70-lb (32-kg) Starter Weight on 26x12-12 Tire - 151NLVBM18089
Mounting hardware (1) for attaching two 50-lb (23-kg) Weights on 23-in., 24-in., or 26-in. Tire - 151NLVBM17977

Rear Wheels and Tires

Tire Chains - 151NLVTY15201
Tire Chains - 151NLVTY4451
Tire chains (pair) for 26x12-12 tires - 151NLVTY15958

Three-Point Hitch

3-Point Hitch Tractor Receiver Hitch - 151NLVLP25001
Magnetic hitch pin - 151NLVLP63768
iMatch™ Quick Hitch Bushings - 151NLVLVU15507
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick Hitch Bushings - 151NLVLVU12858
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Bushing Kit - 151NLVLP25004
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Bushing Kit - 151NLVLP19969
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick-Hitch Category 1 with adjustable top hook - 151NLVLVB25976
iMatch™/Quik-Coupler Bushing Kit - 151NLVBW15056
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

Reviews



E C C
Location: Warren Texas
Length of Ownership: 1yearOrLonger
Usage: Weekly
2017 2025r

I purchased my 2025r in Beaumont Texas and is cheaply built


Ric 1973
Location: Indiana
Length of Ownership: 1month
Usage: Daily
2025R Big disappointment!

I recently traded my 2010 JD 2320 with a 62" drive over mower deck for a 2021 JD 2025R with a 60" auto-connect mower deck. I ordered this tractor and when it arrived this was sure a disappointment. The 2025R just seems cheap!! For example the individual brakes have been reduced to a single brake pedal, the drawbar has been replaced by a plate with a hole in it, the light that indicates that the 4WD is engaged no longer exists, the levers to shift the pto and hi and lo for the transmission seem very flimsy compared to the old solid levers, the rollbar no longer folds down out of the way, instead it folds down just enough to walk right in to it with your forehead when you try to walk behind the tractor and finally the pedal to lock the differential is just a rod that only sticks out about an inch. I was told by my salesman that there is an aftermarket pedal you can get for the diff lock. When I ordered this tractor I did not see the new models, but I went with 2025r Instead a 1025r because I didn't want to go backwards, but compared to my 2320 it doesn't seem to live up to the standards. I was told that the 2320 was made by Yanmar for John Deere and that the 2025R is made directly by John Deere this is probably the most disappointing part!!


Jason1989
Location: Grand Rapids Michigan
Length of Ownership: 1month
Usage: Daily
2015 great combination tractor

I bought this tractor a month ago and traded in a 1025r it feels like more tractor and I love it very useful and works hard


KO1977
Location: SE Wisconsin
Length of Ownership: 1month
Usage: Monthly
This thing rocks!!

Very powerful little machine, it's great for getting into small places but is happy in wide open spaces as well.


brianw13a
Location: Blissfield, MI
Length of Ownership: 3months
Usage: Daily
Makes managing our land much easier

I bought the 2025R a few months back to help with my bad back. It's exceeded my expectations. We added forks, a rototiller, and post hole digger and now can do nearly anything we want. We've also used the tractor to do things that we never even thought about. While I wouldn't hesitate to buy again, I'd probably go with the smaller 1025R. While the 2025R is more stabile and comfortable for me, the 1025R would fit into smaller spaces.


Jimmy B
Location: Washington NC
Length of Ownership: 6months
Usage: Weekly
Love the Tractor but……

I’ve had the 2025 Tractor for about 5 months and I love it, has plenty of power and works hard, but has couple of things that can be improved: Seat Suspension needed for harsh ride, and needs a guide on the mower deck front attachment for when removing and installing deck with loader on tractor.


Garrys2025r
Location: Mississippi Gulf Coast
Length of Ownership: 3months
Usage: Monthly
Great little tractor.

I have owned the tractor for a few months. Already cleared a fence line, dug a drainage ditch, and mowed my creek property. Work perfectly.


happycad
Location:
Length of Ownership: 6months
Usage: Daily
Very happy 2025R owner

i have a 2019 2025R with loader, backhoe, 54D mower, rear Frontier blower and other non-Deere implements. It is used on our large forested property for all types of regular (mowing, snow) and periodic (box blading, digging, etc.) tasks. Perfect machine for our size property and usage pattern. While the 1025R is similar and very capable, the tire size, height, clearance, weight, ground speed, and stability differences more than justify this machine in my opinion. With tractors, more power and size is almost always better but I have found you need to buy for your expected usage and realistic "peak" uses to avoid buyers remorse. I have read about many upgrades created by just slightly underbuying. This particular tractor feels like and for me is one that allowed me to feel very satisfied without looking up at the larger frame 2-series or entry 3-series with tractor envy. This is a very capable and relatively affordable machine.


Fatty Patty
Location: Olalla, WA
Length of Ownership: 3months
Usage: Weekly
The little engine that could :) !

This compact tractor and backhoe is the perfect size for my wife and I to operate and maneuver around our little place. The manual thumb of the backhoe is a MUST HAVE!!!


Jim M
Location: Bloomer, WI
Length of Ownership: 1yearOrLonger
Usage: Weekly
Easy to use

We live on 35 acres with 30 of it rented to a local farmer. Originally purchased a 1025R, but it was just a little to small for what I was doing. The 2025 fits the bill perfectly.


Videos