×
Quick Equipment Search
Equipment Filter










used search tag used search tag

John Deere 2032R

Compact Tractor


  • Standard LED headlights and fender lights
  • Comfortable, marine-grade seat stays in top condition
  • Larger, heavier frame for added stability
  • Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes



Starting At:

$28,300.00

View Product Brochure

Features

Powerful, high-torque diesel engine delivers superb efficiency
Yanmar 3-cylinder, TNV series diesel engine Yanmar 3-cylinder, TNV series diesel engine

2032R

The 1.642-L (100.2-cu in.) displacement, liquid-cooled 3TNV88C-NJT Yanmar® diesel engine provides 22.9 kW ( 30.7 hp) to the 2032R.

 

 Model

Number of cylinders

Engine displacement

 Aspiration

Gross engine power*

Gross engine PS*

Power take-off (PTO) power*

2032R

3

1.642 L (110.2 cu in.)

Natural 

22.9 kW (30.7 hp)

31.2 PS

18 kW (24.2 hp)

 

*Engine kW (hp), gross SAE J1995:  22.9 (30.7) at 2500 rpm, PS

Displacement, L (cu in).: 1.642 (100.2)

2038R

The 1.568-L (95.8-cu in.) displacement, turbocharged liquid-cooled 3TNV86T-NJT Yanmar diesel engine provides 27.4 kW ( 36.7 hp) to the 2038R.

 

 Model

Number of cylinders

Engine displacement

 Aspiration

Gross engine power*

Gross engine PS*

PTO power*

2038R

3

1.568 L (95.8 cu in.)

Turbocharged

27.4 kW (36.7 hp)

37.2 PS

22.7 kW (30.4 hp)

 

*Engine kW (hp), gross SAE J1995: 27.4 (36.7) at 2500 rpm, PS

Displacement, L (cu in.): 1.568 (95.8)

 

The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

 

The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and a lower cost of operation.

 

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

 

The engine comes with an aftertreatment system.  The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated.  In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).

 

After many hours of use, the exhaust filter may require an ash removal service.

Parked filter cleaning

In some instances where passive and active filter cleaning have not fully cleaned the particulate matter from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

 

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

 

The emissions system on this engine constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

 

NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.

 

For more information regarding Environmental Protection Agency (EPA) regulations and the technology behind John Deere Integrated Emissions Control systems, click here.

Yanmar TNV Series engine offers these features:

  • Economical cast-in-block cylinder design for good cooling and long life
  • Direct fuel injection
    • Improves starting
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel than indirect injection engines
  • Aluminum alloy pistons are lightweight to reduce connecting rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, which reduces blow-by and noise from piston slap
    • Top rings are higher on the piston and a thinner head gasket is used to greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears have a helical profile to reduce engine noise
  • Auto-bleed fuel system
    • There is no need to prime the system if the tractor runs out of fuel
    • The system self-primes the injection pump, lines and injectors, providing fast fuel recovery for easier starting
  • High-capacity lubrication system provides filtered oil, under pressure, to all engine bearings for long life 
  • Fuel filter with replaceable element
  • Water separator with additional replaceable filter element
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Dry-type air cleaner with safety element
    • Dual element design for added engine protection
    • Air cleaner service indicator is standard equipment on all models and alerts the operator on the instrument panels
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels 

 

Yanmar is a trademark of Yanmar Co., Ltd.

DOC/DPF
#

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning
  • DOC/DPF pressure sensors
  • A particulate matter buildup estimation based on load conditions

 

Once one of the three conditions have been met, filter cleaning will occur. There are three different types of filter cleaning processes:

  • Passive filter cleaning
  • Active filter cleaning
  • Parked filter cleaning
Passive filter cleaning

Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

 

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Active filter cleaning

If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then particulate matter is removed using active filter cleaner.

 

To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize particulate matter.

 

It is important to note that at no time is fuel in the DOC/DPF ignited, and there is no interruption to tractor operation.

 

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Easy-to-use hydrostatic transmission (HST) increases productivity

The 2032R and 2038R Tractors are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation
  • Transmission oil cooler cools transmission oil for longer transmission life

 

Safety features of the HST transmission include:

  • The tractor will only start with the range lever in neutral
    • If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
  • The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged
Twin Touch foot controls
Twin Touch foot controls Twin Touch foot controls

Key John Deere advantages – John Deere’s Twin Touch foot controls offer several key advantages over competitive HST models tractors.

  • Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the HST
    • Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
    • The Twin Touch configuration also makes it easier to inch the tractor forward or rearward (i.e., when attaching to implements)
Integrated hydrostatic pump and motor
  • Sauer-Danfoss® manufacturer provides the integrated pump and motor; this assures that the components are matched to each other, providing maximum efficiency
  • Provides strength and durability needed for operating such attachments as loaders and backhoes
  • One reservoir (with one check-point and fill point) for the transmission, differential, and hydraulic system speeds up daily maintenance
  • Mechanically actuated by Twin Touch foot pedals allow the operator to select both directions of travel and speed with the touch of a toe
Cruise control

An electronic cruise control is standard equipment on the 2032R and 2038R Tractors. Cruise control is electronically engaged and disengaged using a toggle switch located on the right-hand console.

  • Maintains desired forward speed without having to touch the forward pedal
  • To disengage the cruise control, either apply pressure to the brake pedal or disengage the cruise control switch

Sauer-Danfoss is a trademark of Sauer-Danfoss Incorporated.

Operator station is comfortable and convenient
Operator Station Operator Station

The operator station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color coded controls allow for easy identification and operation. The design of the operator station allows operators to sit “in” as opposed to “on” which provides comfort and increased stability.

 

Below are other key features of the 2032R and 2038R Tractor operator’s station:

  • Sloping hood design provides improved visibility
  • Plenty of room for comfortable operation
  • Cup holder, multiple storage compartments and a 12V outlet ensures an organized operator station
  • Rubberized floor mat design to reduce vibration and noise
  • Step-through operator platform makes getting on and off the tractor easy
  • Fender-mounted handrails, large and easy to grab, assist the operator when getting on and off the tractor
  • Controls have been raised and integrated into the fender for operator comfort and ease of use
  • Large, easy to read decals provide clear instructions for experienced and even non experienced operators
  • Front horizontal exhaust for increased operator visibility
  • If the operator leaves the tractor seat when the transmission, mid PTO, or rear PTO is engaged, the engine will shut down
    • For applications where out-of-seat PTO operation is required, the following criteria must be met: transmission in neutral, park brake engaged, and PTO selector set to rear only. See operator's manual for specific instructions.
  • Specially designed panels route hot air flow from the engine compartment under the tractor instead of directly onto the operator
Left-side step
Left-side entrance step Left-side entrance step
  • The left-side step allows for easy access on and off the tractor
  • Foot platform has a non-skid surface
Premium seat
Premium high-back seat Premium high-back seat

The thick, soft padding on this seat provides a smooth and comfortable ride with added weather resistance from marine grade vinyl that is easy to clean. A high, scalloped back makes it easier for the operator to turn to view rear implements.

  • Seat adjusts fore/aft for operator convenience
  • Seat flips forward for protection from the elements
  • High seat back and armrests are in base equipment and allow for a more comfortable operation
  • Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls

 

Key features of the operator’s station include:

  • Tilt steering wheel design in base equipment on the 2032R and 2038R Tractors
    • Allows the operator to adjust the steering wheel to the most comfortable position
    • Provides additional clearance for the operator to enter and exit the tractor
    • Provides easy return to the fully raised position
    • Provides plenty of room for comfortable operation
Tilt steering lever Tilt steering lever
  • Easy-fold ROPS allows tractor to be used or stored in low clearance environments
Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
CommandCut™ controls allows quick and accurate height of cut adjustments
Instrument panel Instrument panel
CommandCut™ controls CommandCut™ controls

The 2032R and 2038R tractors features the CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator. Some of the key benefits of this system are:

  • Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.
  • Inhibits PTO operation when mower deck is in the install position to prevent PTO driveling and mower deck blade damage
  • Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions
    • Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf
  • Precise height of cut with no drift or leakdown
    • System can be calibrated to different tire sizes to maintain precision
  • Minimum effort required to set height of cut and to raise/lower the mower deck which reduces operator fatigue
  • Easy to read graphical interface on the instrument panel allows operator to glance at the desired height of cut while staying focused on mowing
  • Built in transport lock can be activated from the seat by turning the height of cut dial to position 6 and raising the deck to the highest position 
Excellent serviceability and diagnostics reduce operational cost and improves productivity

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive ServiceADVISOR™ system.

 

  • Four quarter turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Quarter turn fasteners Quarter turn fasteners
Right tractor side panel removed Right tractor side panel removed
  • Easy access to regular service points minimizes service time
  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels
  • Tractors are equipped with an electronic air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed
Air filter restriction sensor Air filter restriction sensor
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
  • All external engine, fuel and transmission filters are easily accessible
  • Increased service intervals lessen overall cost of ownership
  • Hydraulic oil service interval increased to 1200 hours when using Hy-Gard™ products
  • Hydraulic oil filter will need to be changed every 400 hours
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling
Fuel Tank Fuel Tank
  • Gas-lift hood support eliminates the need for a mechanical prop rod
Gas-lift hood shocks Gas-lift hood shocks

All items in the daily service schedule can be performed without the use of tools:

  • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed
  • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks

 

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

Specs & Compare


Key Specs

2032R
Current Model
Engine power (gross)SAE J1995 rated power: 22.9 kW
30.7 hp
31.2 PS at 2500 rpm
Power take-off (PTO) power18 kW
24.2 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlStandard
Approximate shipping weight (open-station; cab)Open station: 1306 kg
2879 lb
Cab: Not applicable
Wheelbase1723 mm
67.8 in.

Engine

Family
ManufacturerYanmar®
Engine model3TNV88C-NJT2
Engine power (gross)SAE J1995 rated power: 22.9 kW
30.7 hp
31.2 PS at 2500 rpm
Power take-off (PTO) power18 kW
24.2 hp
Rated engine speed2500 rpm
TypeDirect Injection
Injection pump typeDirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacementThree cylinders: 1.642 L
100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88x90 mm
3.46x3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed87.5 Nm
64.5 lb-ft
Fuel tank capacity32 L
8.5 U.S. gal.

Electrical

Battery size500 CCA
Alternator (12-V)85 amp
Starter size1.4 kW
1.9 hp

Fuel system

TypeDirect Injection
Fuel consumption

Transmission

Standard transmission; forward/reverseHydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final driveSpur gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1800 kg
3968 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load

Hydraulics

TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeDual gear
Maximum operating pressure172 bar
2495 psi
Draft control sensingPosition control
Remote control valves availableUp to three

3-point hitch

TypeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb

Power take-off (PTO)

StandardRear: 543 rpm
Mid: 1998 rpm
Optional
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)Wet disc
Engagement method

Fluid capacities

Crankcase with filter4.5 L
4.8 qt
Transmission and hydraulic system

Final drive

TypeSpur Gear
Differential lockYes

Operator station

Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleSemi-flat
Gear shift location - console/floor

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Height
Wheelbase1723 mm
67.8 in.
Front axle clearance
Turning radius with brakes2.46 m
8.07 ft
Turning radius without brakes
Limited slip differential
Approximate shipping weight (open-station; cab)Open station: 1306 kg
2879 lb
Cab: Not applicable

Tires

FrontR1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
RearR1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20
Front tread range
Rear tread spacing

Miscellaneous

ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Accessories

Chain Box - 1536LV5WS812470
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Chainsaw Holder - 1536LV5WS812460
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Clamp Kit - 1536LV5WS812485
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Handheld Leaf Blower Holder - 1536LV5WS812466
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Long Tool Holder (2) - 1536LV5WS812450
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Long Tool Holder (4) - 1536LV5WS812455
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Mini Clamp Kit - 1536LV5WS812480
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
ROPS Rack - 1536LV5WS812425
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
String Trimmer Holder - 1536LV5WS812475
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Super Clamp Kit - 1536LV5WS812490
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks
Universal Mount Kit - 1536LV5WS812435
Tool storage products on wall	Tool storage products on wall
Tool storage products on 3E Tractor Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack 5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E 5WS812430 ROPS rack on 3E
5WS812435 universal mount 5WS812435 universal mount
5WS812460 chainsaw holder 5WS812460 chainsaw holder
#
5WS812450 two tool holder 5WS812450 two tool holder
5WS812455 four tool holder 5WS812455 four tool holder
5WS812466 leaf blower holder 5WS812466 leaf blower holder
5WS812470 chain box 5WS812470 chain box
5WS812475 on ROPS rack 	5WS812475 on ROPS rack
5WS812475 5WS812475
5WS812480, 5WS812485, and 5WS812490 on ROPS rack 5WS812480, 5WS812485, and 5WS812490 on ROPS rack

Overview

The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.

 

Benefits

  • Customizable and expandable with multiple mounting locations and tool holder designs
  • On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
  • Does not interfere with tractor functionality
  • Increased capability when doing off tractor tasks

Backhoes

16 In. Bucket (0.90 Cu. Ft.) - 1536LVBLV10026
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

8 In. Bucket (0.42 Cu. Ft.) - 1536LVBLV10024
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Hydraulic Thumb - 1536LVBXX10248
Mechanical thumb shown on 485 backhoe Mechanical thumb shown on 485 backhoe
Thumb schematic shown Thumb schematic shown
BXX10248 Hydraulic thumb kit shown	BXX10248 Hydraulic thumb kit shown
BXX10248 Hydraulic thumb kit shown BXX10248 Hydraulic thumb kit shown
BXX10891 Hydraulic Thumb Kit shown BXX10891 Hydraulic Thumb Kit shown
Overview

Backhoe thumb kits add increased functionality of the backhoe by allowing an operator to easily grab items such as logs and debris. Thumb kits come in both mechanical and hydraulic versions with fixed or on the fly position adjustments.  

Mechanical Thumb - 1536LVBLV10750
Mechanical thumb shown on 485 backhoe Mechanical thumb shown on 485 backhoe
Thumb schematic shown Thumb schematic shown
BXX10248 Hydraulic thumb kit shown	BXX10248 Hydraulic thumb kit shown
BXX10248 Hydraulic thumb kit shown BXX10248 Hydraulic thumb kit shown
BXX10891 Hydraulic Thumb Kit shown BXX10891 Hydraulic Thumb Kit shown
Overview

Backhoe thumb kits add increased functionality of the backhoe by allowing an operator to easily grab items such as logs and debris. Thumb kits come in both mechanical and hydraulic versions with fixed or on the fly position adjustments.  

Ripper - 1536LVBXX10247
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Rubber Street Pad Kit - 1536LVBLV10986
Subframe Mounting Kit (For MY '17 and newer 2032R and 2038R Tractors with 270B backhoe) - 1536LVBLV10594
BXX10279 Subframe mounting kit shown BXX10279 Subframe mounting kit shown
BLV10594 Subframe mounting kit shown BLV10594 Subframe mounting kit shown
BXX10278 Grab Handle and mounting parts shown BXX10278 Grab Handle and mounting parts shown
#
Overview

Backhoe mounting kits are required to add a backhoe to a compact utility tractor.

NOTE: Power beyond kit is required on all tractors for proper backhoe installation and functionality


 

Trenching Bucket - 1536LVBXX10246
BXX10246 Trenching bucket shown BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown 406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength Heavy-duty roll tube for extra strength
Overview

Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.

Front Hitch

A-frame quick-attach system Category 1N - 1536LVBLV10637
Auxiliary Front Hydraulic Coupler Kit - 1536LVBLV10634
Front 3-point hitch - 1536LVBXX10836
Hydraulic accumulator kit for front 3-point hitch - 1536LVBLV10638
Implement Drive Shaft for Rotary Brooms (model year 2017- 2032R, 2036R, and 2038R) - 1536LVBLV10800
Front 3-point hitch with A-frame adapter (3020 Series Tractor shown) Front 3-point hitch with A-frame adapter (3020 Series Tractor shown)

This hitch can be ordered as an option code within the given implements with which it is compatible (59 Snow Blower, 366 Front Blade, or 60 Front Broom), or it can be ordered as an attachment for field conversion. If the operator already has the hitch, the other implements will need to be ordered with the less hitch code so a second hitch is not ordered.

Mounting Frame and Hydraulic Angling (3120-3720, 3033R-3046R, model year 2017- 2032R, 2036R, and 2038R) - 1536LVBLV10776
Front 3-point hitch with A-frame adapter (3020 Series Tractor shown) Front 3-point hitch with A-frame adapter (3020 Series Tractor shown)

This hitch can be ordered as an option code within the given implements with which it is compatible (59 Snow Blower, 366 Front Blade, or 60 Front Broom), or it can be ordered as an attachment for field conversion. If the operator already has the hitch, the other implements will need to be ordered with the less hitch code so a second hitch is not ordered.

Snow blower drive shaft (model year 2017 and newer 2032R, and 2038R) - 1536LVBLV10799
Snow blower mounting kit - 1536LVBXX10906
BLV10708 Quick Hitch shown BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown BXX10678 Snow Blower Drive Shaft shown
BLV10794 52” Broom Attaching Kit shown BLV10794 52” Broom Attaching Kit shown
BLV10795 60” Broom Attaching Kit shown BLV10795 60” Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown Front Quick Hydraulic Angling Kit example shown
Overview

Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements

Front Weights

Front Weight Bracket Extension Kit - 1536LVLVB24952
Quik-Tatch Weight, 42 lb (19 kg) - 1536LVUC13263
R51680 Front Quik-Tatch™ weights shown R51680 Front Quik-Tatch™ weights shown
UC13263 Quik-Tatch™ weights shown UC13263 Quik-Tatch™ weights shown
Overview

Weights can be installed on the front of a tractor when additional ballast is needed.

 

NOTE: The weight bracket and weights are not compatible when the loader is installed on the tractor. See the ballasting and optimizing performance section or the tractor operator's manual for additional ballasting information.

 

Benefits

  • Increased ride comfort
  • Increased stability
  • Acts as a counterbalance to heavy attachments on the front or rear of the tractor.
Quik-Tatch Weight, 70 lb (32 kg) - 1536LVLVU32113
R51680 Front Quik-Tatch™ weights shown R51680 Front Quik-Tatch™ weights shown
UC13263 Quik-Tatch™ weights shown UC13263 Quik-Tatch™ weights shown
Overview

Weights can be installed on the front of a tractor when additional ballast is needed.

 

NOTE: The weight bracket and weights are not compatible when the loader is installed on the tractor. See the ballasting and optimizing performance section or the tractor operator's manual for additional ballasting information.

 

Benefits

  • Increased ride comfort
  • Increased stability
  • Acts as a counterbalance to heavy attachments on the front or rear of the tractor.

Front Wheels and Tires

23x8.50-14 (4PR, R3 Turf, 1 Position) Bias Ply - Front Wheels & Tires - 1536LVBLV10598
23x8.50-14 (4PR, R4 Industrial, 1 Position) Bias Ply - Front Wheels & Tires - 1536LVBLV10600
7.00-12 (4PR, R1 Ag, 1 Position) Bias Ply - Front Wheels & Tires - 1536LVBLV10596

Hydraulics

3rd Function Selective Control Valve - 1536LVBXX10968
Power Beyond Kit - 1536LVBXX10815
Power Beyond Kit - 1536LVBLV10881
Power beyond kit example shown Power beyond kit example shown
BLV11238 Power beyond kit shown BLV11238 Power beyond kit shown
BLV10881 Power Beyond Kit shown BLV10881 Power Beyond Kit shown
BLV11010 Power Beyond Kit shown BLV11010 Power Beyond Kit shown
LVB25221 Power Beyond Kit shown	LVB25221 Power Beyond Kit shown
LVB25505 Power Beyond Kit shown LVB25505 Power Beyond Kit shown
LVB26069 Power Beyond Kit shown LVB26069 Power Beyond Kit shown
LVB25781 Power Beyond Kit shown LVB25781 Power Beyond Kit shown
BLV10962 Power Beyond Kit shown BLV10962 Power Beyond Kit shown
BLV10964 Power Beyond Kit shown BLV10964 Power Beyond Kit shown
LVB25085 Power Beyond Kit shown LVB25085 Power Beyond Kit shown
LVB25780 Power Beyond Kit shown LVB25780 Power Beyond Kit shown
LVB26071 Power Beyond Kit shown LVB26071 Power Beyond Kit shown
LVB25512 Power Beyond Kit shown LVB25512 Power Beyond Kit shown
LVB26066 Power Beyond Kit shown LVB26066 Power Beyond Kit shown
LVB25220 Power Beyond Kit shown LVB25220 Power Beyond Kit shown
BLV11068 Power Beyond Kit shown	BLV11068 Power Beyond Kit shown
BLV10969 Power Beyond Kit shown BLV10969 Power Beyond Kit shown
Overview

Power beyond kits provide access of pressurized hydraulic oil at the rear of the tractor for operating attachments equipped with an open center control valve, such as a backhoe and log splitter when continuous hydraulic flow is required.

 

NOTE: When nothing is hooked up to the power beyond, it is critical the loop is closed to ensure proper hydraulic flow.

 

NOTE: Power beyond kits are not included in the backhoe frame attachments and must be ordered separately.

 

NOTE: See the serial number break table for reference to the start of model year 2011 Power Beyond serial_number_breaks_cuts

Single Point Hydraulic Connector - MSL 220R - 1536LVBXX10542
#
#

    220R Loader with single point hydraulic connector shown

#
#
#

    120R Loader with BXX10283 single point hydraulic connector shown

Overview

Available on 120R and 220R loaders, the hydraulic single-point connector saves the operator time and effort during the loader removal and installation process. This feature allows effortless connection or removal of boom and bucket hydraulic connection lines within seconds.

 

This single-point hydraulic coupler attachment supports two hydraulic circuits used to operate the loader boom and bucket. 

 

The single point system contains two main sections: tractor and loader halves. The tractor half that remains on the tractor is securely mounted, utilizing a bracket that is held in the same place as the loader mounting frame. The loader half is flexible and when disconnected, remains with the loader (parked).

Single Point Hydraulic Connector - NSL 220R - 1536LVBW16970
#
#

    220R Loader with single point hydraulic connector shown

#
#
#

    120R Loader with BXX10283 single point hydraulic connector shown

Overview

Available on 120R and 220R loaders, the hydraulic single-point connector saves the operator time and effort during the loader removal and installation process. This feature allows effortless connection or removal of boom and bucket hydraulic connection lines within seconds.

 

This single-point hydraulic coupler attachment supports two hydraulic circuits used to operate the loader boom and bucket. 

 

The single point system contains two main sections: tractor and loader halves. The tractor half that remains on the tractor is securely mounted, utilizing a bracket that is held in the same place as the loader mounting frame. The loader half is flexible and when disconnected, remains with the loader (parked).

Lighting

Dual Light Forward Lighting Kit - 1536LVLVB25546
#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

LED Work Light Kit - 1536LVBLV10497
#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

Open Station Work Light Brush Guard Kit - 1536LVBLV10399
Shown on 4000 TEN Series Tractor Shown on 4000 TEN Series Tractor

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

For open-station tractors only.

Two guards included in each kit.

Premium LED Work Light Kit - 1536LVBLV10673
LVB25546 Forward-lighting kit shown LVB25546 Forward-lighting kit shown
LVB25547 Rear worklight kit shown LVB25547 Rear worklight kit shown
LVB26026 Rear worklight harness kit shown LVB26026 Rear worklight harness kit shown
BLV10620 Rollover protective structure (ROPS) brush guard kit shown BLV10620 Rollover protective structure (ROPS) brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10399 Worklight brush guard kit shown BLV10399 Worklight brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10400 Warning light brush guard kit shown BLV10400 Warning light brush guard kit shown
BLV10673 Premium light-emitting diode (LED) worklight kit shown BLV10673 Premium light-emitting diode (LED) worklight kit shown
BLV10673 Premium LED worklight kit shown BLV10673 Premium LED worklight kit shown
Overview

Worklight kits offer additional light for increased visibility while working in dark conditions.

Brush guard kits protect lights from damage caused by low branches on tress and provide a mount solution for additional worklights.

Benefits
  • Adjustable lights for placing light where operators need it
  • Additional protection from branches
  • Original equipment manufacturer (OEM) quality lights
ROPS Lights Brush Guard Kit - 1536LVBLV10400

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

Two guards are included in each kit and are for open-operator station (OOS) tractors only.

Single Rear Auxiliary Rear Work Light Kit - 1536LVLVB25547
Rear work light Rear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

Open Operator's Station

Canopy - Standard - 1536LVLVB25334
LVB25334 Canopy Kit shown LVB25334 Canopy Kit shown
LVB25332 Canopy Mounting Kit shown LVB25332 Canopy Mounting Kit shown
BSJ10363 Canopy Mounting Kit shown BSJ10363 Canopy Mounting Kit shown
BSJ10341 Canopy Mounting Kit shown BSJ10341 Canopy Mounting Kit shown
Overview

The canopy attaches to the tractor’s rollover protective structure (ROPS) to protect operators from the sun and inclement weather.

Canopy Mounting Bracket and Hardware Kit - 1536LVLVB25332
BRE10349 canopy bracket kit parts BRE10349 canopy bracket kit parts
Canopy system mounted on 6120E Canopy system mounted on 6120E

The canopy bracket kits provide mounting solutions for the popular LVB25334 ABS canopy, allowing it to fit the rollover protective structure (ROPS) of the 2 Series through 6 Series as well as older open operator station 7 Series Tractors. The bracket system provides up to 15 degrees of total travel allowing the canopy to be adjusted horizontal to the ground, or pitched forward or backward to meet the specific needs of the operator. Adjustment of the pitch angle requires loosening of six nuts while mounted to the ROPS. The angle is then adjusted by holding the canopy at the desired pitch and tightening the nuts again.

 

Both of these kits include mounting brackets for the right-hand and left-hand side, all hardware, and installation instructions. The canopy itself (LVB25334) must be ordered additionally.

Illuminated Rear License Plate Kit - 1536LVBLV10677
BXX10277 License plate kit shown BXX10277 License plate kit shown
Overview

License plate kits allow an operator to display a license plate on the tractor in order to meet local laws and regulations in which to drive on public roads.

ShadePro Designed Canopy - 1536LVBXX10590
Tractor Cover - 1536LVLP95637
LP95637 Tractor cover shown LP95637 Tractor cover shown
Overview

Provide all-weather protection to the tractor when not in use with a tractor cover.

Benefits
  • Weather resistant material
  • Protects against UV damage, rain, dirt, etc.
  • Keeps the seat dry
Weather Protection Umbrella - 1536LVTY25324
Umbrella Umbrella

Provides the operator the necessary shade and protection from the elements.

  • Attaches to the tractor's rollover protective structure (ROPS)
  • For open-station tractors only

Operator's Station

133.4-mm (5.2-in.) tie-rod assembly - 1536LVRE561251
38-mm (1.5–in.) ball with model year 2010 stud - 1536LVRE576490
38.1-mm (1.5–in.) ball mount and socket arm - 1536LVRE574454
76.2-mm (3-in.) tie-rod assembly - 1536LVRE558819
Bracket, Arm, RAM Double Socket - 1536LVPF80459
Cell Phone Suction Cup Kit - 1536LVBXE10606
Mount - RAM U-Bolt - 1536LVPF80460
Mounting Ball Stud - 1536LVRE558821
Mounting Parts - Display Mount RAM - 1536LVAL212683
RAM Mount Vesa Bracket 1.5 - 1536LVUC17356
X-Grip Tablet Dual Suction Cup Kit for Tablets - 1536LVBXE10607

Rear Power Take-Off (PTO)

John Deere Quik Knect™ PTO receiver - 1536LVBLV10953
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11178
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11199
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11177
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11200
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11201
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11203
John Deere Quik-Knect Driveline Yoke Bundle - 1536LVBLV11202

Rear Wheel Weights

Attaching Hardware for Rear Wheel Weight, 60 lb - 1536LVBM17987
#
Attaching Hardware for Starter Rear Wheel Weight, 60 lb for 16 in. and 19.5 in. Wheel - 1536LVBM19938
Rear Wheel Weight, 60 lb (27.2 kg) - 1536LVBM17965
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown) UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown) BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown) BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown) BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown) T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown) BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview

Wheel weights provide extra traction and stability by adding ballast to the rear wheels.

 

Click here to view the Wheel Weight Compatibility Guide

Rear Wheels and Tires

12.4-16 (6PR, R1 Ag, 1 Position) Bias Ply - Rear Wheels & Tires - 1536LVBLV10595
14-17.5 (4PR, R3 Turf, 1 Position) Bias Ply - Rear Wheels & Tires - 1536LVBLV10597
14-17.5 (4PR, R4 Industrial, 1 Position) Bias Ply - Rear Wheels & Tires - 1536LVBLV10599
300/70 R20 (R3 Turf, 1 Position) Radial - Rear Wheels & Tires - 1536LVBLV10602
Tire Chains - 1536LVTY4460
Tire chains on X300 Tire Tire chains on X300 Tire

Overview

 

Tire chains provide added traction in snowy and icy conditions.

 

Additional details

 

  • Roadmaster tire chains have a single cross-chain design that runs across the tire (resembles a ladder) and is used for on-road and off-road conditions
  • Duo Grip tire chains have a dual cross chain design that forms an “H pattern” and is suited specifically for off-road conditions

 

 

Tire Chain Chart

Three-Point Hitch

3-Point Hitch Tractor Receiver Hitch - 1536LVLP25001
LP25001 3pt hitch receiver hitch shown LP25001 3pt hitch receiver hitch shown
Overview

Move trailers and other wheeled implements easily with the 3-point receiver hitch.

Benefits
  • Easily move trailers and other wheeled implements
  • Accepts standard 2-inch receivers ball mounts
  • Compatible with CAT 1 IMatch Quick Hitch or and CAT 1 3pt tractor hitch
Magnetic hitch pin - 1536LVLP63768
Magnetic hitch pin Magnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

iMatch™ Quick Hitch Bushings - 1536LVLVU15507
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick Hitch Bushings - 1536LVLVU12858
iMatch™ Bushing Kit - 1536LVLP19969
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Bushing Kit - 1536LVLP25004
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick-Hitch Category 1 with adjustable top hook - 1536LVLVB25976
iMatch Quick-Hitch (LVB25255) iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255) iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976) iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

 

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

 

NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 0.76-0.77 in.
    • Outside diameter: 1.24-1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89 in.
    • Outside diameter: 1.43 to 1.44 in.
iMatch™/Quik-Coupler Bushing Kit - 1536LVBW15056
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

Reviews



dcfarm
Location: ohio
Length of Ownership: 1yearOrLonger
Usage: Weekly
good machine,, but

I have had a 650 with extratrak tires that i bought new over 30 years ago. always able to get it out of the mud and difficult areas. 4 wheel drive and able to lock both back tires when it go bad. the 2032 is not like that. going up a gentle slope in the snow, in "4 wheel drive" i had one front wheel turning and one back wheel turning. have been very nearly stuck multiple times. with out being able to have positive traction which i asked for and was told it had when i bought the tractor. It is a good tractor so far, just don't use it in the mud, snow, soft ground. or on a hill.


AplusRyan
Location: Napoleon, Ohio
Length of Ownership: 1yearOrLonger
Usage: Weekly
Great tractor, Worthless poorly designed loader.

I "upgraded" from a 2001 4110 FEL and 60" belly mower. It was a lighter tractor and mowed exceptionally well designed loader. I purchased the re-designed 2018 2032R with an FEL and 60" mower. The features on this tractor with the AutoConnect mower deck are light years beyond the competition and have gotten even better in 2022 with the self leveling loader and newly available 3rd function. As the non-self leveling loader is absolute rubbish in design and function, I'd highly recommend the self leveling model just because there is no way it could be worse than the 220R! The loader cylinder geometry renders bucket control to a rattling clunky affair that you cannot keep level to the ground you are working. My loader lacks the lift capacity of the old 4110. Get the fast coupler option for the loader as well. The 4 separate Pioneer connectors are poorly mounted, hard to couple, and undersized. The tractor could certainly benefit from more hydraulic gpm's. The front axle is a carryover from the miserable performing 4200 from the 90's. It won't turn as tight as a 3R series and will scuff on all but the driest of lawns. I wish the deck lift were hydraulic instead of hydraulic. The electric affair has already died on me once (warranty thank God).If they would update the 3R series with the available options on the 2R that would be a better option. You cannot believe how easy to use and pleasant this tractor is! The loader is just worthless.


sfbillings
Location: fairbanks Alaska
Length of Ownership: 1week
Usage: Daily
Good, but could use some refinements

I have had this tractor for a week now, and have used it daily. This was a replacement unit for my Kubota B2650. The performance seems great. A few little things I don't care for include the placement of the key, and the lack of room around the differential lock. The lock, the 4wd selector, and the parking brake are close together, and there is insufficient room when wearing snow boots. I can live with these things, and the hydrostatic transmission is much quieter than the Kubota.


R3800
Location: Greenville NC
Length of Ownership: 1yearOrLonger
Usage: Daily
JD2032r

I bought this tractor in 2014 and now have over 1400 hours of operation on it. It is a high quality product, remarkable engine and hydraulics, and very powerful for its size. I mow about 7 acres a week with a 6 foot finishing mower. I also have a belly mower but opted out for a 3-pt hitch finish mower last year because of the terrain I mow. Both mowers worked great, but I prefer the 3-pt hitch mower for ease of removal and hookup since I also use the tractor for garden work. It handles a 5 ft tiller with ease, and all other rear implements as well. I recommend it highly and my next purchase will be another John Deere, . . . perhaps one with an air conditioned cab.


DLBERRYFARM
Location: wisconsin
Length of Ownership: 6months
Usage: Weekly
Extremely capable tractor suitable for serious use

After a lot of research and talking to individuals with small acreages to contractors that use small tractors for landscaping work, I purchased a 2020 JD 2032R. Every guy that makes a living with small tractors recommended buying a John Deere if I could afford it. When I got a price for a comparable Kubota (not a stripped down Kubota), the JD 2032R was $50 more than the lowest JD dealer. JD dealers do vary a lot in price so shop around. The layout of the controls and the features built into the JD reflect a lot of refinement over older JD tractors and everything else on market. The FEL and mower detachment/attachment are amazingly well designed features. I immediate put my tractor into heavy use and over loaded the 220 FEL moving pallets of bricks. The 2032 repeatedly picked up in excess of its rated capacity and my contractor told me his orange tractor is lucky to lift 80% of its rating. The rest of the experience with the unit has been the same. Performing better than I expected. Mowing with the electric 60" deck is a premium experience and the tractor did not even notice running a 60" tiller through sod. Of special note, the emission regen system works perfectly and this is not a small matter. Many tractors with orange paint are failing to regenerate and spending a lot of time at the dealership rather than working for the owner. With the Deere, you just use it and the harder you work it, the better. The tractor takes care of the rest. The only real negative is this tractor is heavy and it leaves prints in my house yard after a good rain. I did buy a small rider for around the house to keep my wife happy. For mowing large areas, the 2032R is excellent. One caution is do not let your wife use it. My wife thinks its her tractor now.

Pros:

  • serious equipment that exceeds its ratings
  • easy to use fel and mower deck
  • well laid out controls
  • emission regen works without intervention
  • easy to operate

Cons:
  • heavy for mowing on wet ground

CozIII
Location: Ok
Length of Ownership: 3months
Usage: Weekly
John DEERE 2032R all round is great

New to using tractors I Like this one cause of the ergonomics paid all cash for it and all attachments. 33k I believe. Human error on using imatch and bushings I didn’t need. Just great all round Just need a grapple. I went with John Deere attachments cause I just wanted to make sure it fits. They are a bit over priced but John Deere service is the greatest. On explanation and repairing etc. It took them forever to get some of my attachments during lock down of 2020 coronavirus. But got them all. Still learning all the ins and out but I love it. I match was a bit tricky but I think I had wrong bushings

Pros:

  • best trac all around

Cons:
  • the manuals are a bit difficult for beginners

Edmondson
Location: Jefferson, mD
Length of Ownership: 1yearOrLonger
Usage: Monthly
2016 2032R

I got a 2032R 4 years ago and it is going strong, not a single problem yet. I have about 150 hrs on it, and it is a fantastic piece of equipment to have around our home (9 acre property).


MAH63jd
Location: Lebanon
Length of Ownership: 1yearOrLonger
Usage: Weekly
broke after 60 hours :(

I've owned this tractor new for 4 years and it has always been kept in a nice clean shop. It has 60 hours and have already had to replace the instrument panel due to the PTO kicking out after being on for 20 seconds, I've always been a big JD fan. I believe after this I'll probably be looking at other brands.


Cons:

  • a lot of the parts are made in china

Matt0404
Location: Butler, PA
Length of Ownership: 1yearOrLonger
Usage: Weekly
Very disappointed

First let me start off by saying.. My nearly 2 year old son's room is Green, he is getting a green electric tractor for his bday. Green was the only choice when I looked at tractors . I currently have 160 hours on machine and it is at the dealer for the 4th time. Bearing and seal for pto, hydraulic pump, some sort of valve... and now who knows.. I loathe it to the point I won't buy attachments for it because it makes me ill running the FEL with all the hydraulic noises it makes that it shouldn't. I've been able to steer other people away from this unit please do ur self a favor and stay away. I'm not saying John deere is bad, heck I even offered to trade it in and buy up but apparently it depreciated astronomically in 2 years.. I think around 40%. (I have babied this thing the only nights it has spent outside was in the dealership parking lot always washed greased, and properly operated) I Don't buy this tractor buy something else. I'm a forestry equipment operator of 15 years. I've ran 30 year old pieces of equipment, and equipment with the plastic still on the seats.

Pros:

  • fel connects fast and easy
  • mower deck is easy to connect

Cons:
  • paints don't match between panels
  • unrealiable

Videos