×
Quick Equipment Search
Equipment Filter










used search tag used search tag

John Deere SW21 Series

Rotary Brooms


  • Angling degree range
  • Brush diameter is 32 inches for big jobs
  • Optional dust suppression system
  • Optional gauge wheel kit for setting height



View Product Brochure

Features

Angling degree range
Angle to the left or right Angle to the left or right

The loader-mount hydraulic rotary broom has an angling range from 0 to 23 degrees both left and right. Setting the angle allows for the windrowing of material off of surfaces.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

Brush diameter is 83 cm (32 in.) for large jobs
Brush is large enough for tough jobs Brush is large enough for tough jobs

The 83-cm (32-in.) diameter brush is large enough for the toughest jobs.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

Optional dust suppression system
SW21 Series dust suppression system SW21 Series dust suppression system
227-L (60-gal.) tank 227-L (60-gal.) tank

The optional dust suppression system consists of a 227-L (60-gal.) tank supplying water up the nozzles that are positioned in the front of the broom.

 

The nozzles are easily controlled by a toggle switch located by the height hitch lever.

 

NOTE: Requires the poly and steel deflector kit. Compatible with lawn dethatching kit.

Optional gauge wheel kit for setting surface height of broom
For setting surface height of broom (shown with dethatching kit installed) For setting surface height of broom (shown with dethatching kit installed)
Gauge wheels shown in rear park stand mounting tubes Gauge wheels shown in rear park stand mounting tubes

An optional pair of gauge wheels are available for setting the height of the broom for limited surface contact. This ensures easy operation when sweeping surfaces or dethatching lawns.

 

It includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

Dust deflector for SW21 Series Loader-Mount Rotary Brooms

A steel and rubber dust deflector kit directs material downward when using the SW21 Series Loader-Mount Rotary Brooms.

Dust suppression kit for SW21 Series Loader-Mount Rotary Brooms

The dust suppression kit includes 227-L (60-gal.) water tank, electric pump, nozzles, hoses and fittings, electrical harness with switch, and installation instructions for SW21 Series Loader-Mount Rotary Brooms. 

 

NOTE: Requires the steel/rubber dust deflector kit.

Gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms
Gauge wheels with dethatching and dust suppression kit installed Gauge wheels with dethatching and dust suppression kit installed

The gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

 

NOTE: By mounting wheels in front of the brush with the dethatching bracket installed, better control of ground pressure can be achieved.

Lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms
Lawn dethatching kit components Lawn dethatching kit components
#

The lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms improves control of ground pressure when dethatching and performing general sweeping by moving the gauge wheels in front of and closer to the brush. The kit includes support components, hardware, and installation instructions. The gauge wheel kit is required and sold separately. It is compatible with the dust suppression kit. 

Wafer kit for SW21 Series Loader-Mount Rotary Brooms

The 50/50 poly and steel wafer brush replacement kit for the SW2160, SW2172, and SW2184 Loader-Mount Rotary Brooms includes the required quantity of wafers to replace the entire brush.

Specs & Compare


Dimensions

SW21 Series
Current Model
Machine length175 cm
69 in.
Machine width244 cm
96 in.
Power pack width97 cm
38 in.
Machine height87 cm
34.25 in.
Power pack height132 cm
52 in.

Weight

Machine operating417 kg
920 lb
Power pack operating243 kg
535 lb
Machine shipping561 kg
1237 lb
Power pack shipping243 kg
535 lb

Tractor compatibility

PTO minimum horsepower26.1 kW
35 hp
PTO, rpm540 rpm
Loader, current John Deere series400

Brush

Standard bristle materialsDiameter
81 cm
32 in.
Number of brush wafers
46
Poly
Optional bristle materialDiameter
81 cm
32 in.
Number of brush wafers
46
Combination (poly/wire)

Operation

Working width213.36 cm
84 in.
Working width at max angle195.58 cm
77 in.
Brush speed, rpm200 rpm

Angling

Angling range degrees, left, center, right23, 0, 23 degree (angle)
Shear pin protectionStandard
Angling methodHydraulic

Gauge wheels

StandardOptional
MaterialSolid
Location, front, rearFront
Size, diameter89x254 mm
3.5x10 in.
Adjustable height rangeTotal: 190.5 mm
7.5 in.
Underground level: 63.5 mm
2.5 in.
Quantity

Hydraulics

Operating pressure207 bar
3000 psi
Flow required at operating pressure61 L/min
16 gpm
Power pack reservoir57 L
15 gal.
System capacity64 L
17 gal.

Construction

Hood thickness0.19 cm
0.0747 in.
Side frame construction0.48 cm
0.1875 in.

Miscellaneous

Parking stands standard with unit, quantityFour
Hydraulic protection (relief valve)Standard
Dust deflectorOptional
Dust suppression system (60-gal. water tank)Optional
Brackets for de-icer optional systemStandard

Shipping

ConfigurationWood crate
Units per crateOne

Set-up time

Warranty

Additional information

Offers & Discounts

No current offers.

Videos